CROSS CUTTING RULE Brand: Rankconn Instruments Model: RC-503  Technical Specification:   Model RC-503 Cutting Distance 1mm、1.5mm、2mm、3mm Cutting Length 35mm Cutting Number 11 teeth for each  read more

Industrial Grade - Dehumidifier Brand: Rankconn Instruments Model: FL-S58M Product introduction: Dehumidifier is an air conditioning device which reduces and maintains the level of humidity in the air.   Features: Big Touch Screen Control Panel 8 Litre water tank & soft pipe for directly drain Fault self-check, fault diagnose automatically   Specification: Model FL-S58M Dehumidify Capacity (30°C, RH80% RH) 58L/Day Voltage AC 220-240V/50Hz/1PH; 110V/60HZ/1PH Air Circulation 500m3/h Air Filter Primary/Medium/High Power Input 650W Work Temperature 5~38°C Refrigerant Gas R410A/R22/R407C Dimension (L*W*H) 372 x 394 x 700mm Net Weight 40kg Suitable for Floor Area 40 ~60 m3 read more

JOANLAB - Analytical Balance  Brand: Joanlab Model: FA Series 1. Electromagnetic force compensation technology. 2. Aluminum alloy die cast base and stainless steel pan. 3. Super bright LED display with backlight. 4. RS232 Interface. 5. Clear glass windshield supplied as standard. 6. Overload protection,bubble level adjustment, under hook. 7. Full capacity substraction. 8. Multi weighing units conversation: g/mg/ct/oz. 9.Internal calibration for choice. 10. Weighing, piece counting, percentage weighing. 11. Universal power adapter supplied as standard. 12. Certificated calibration weight supplied as standard. Product Specification: Analytical Balance Technical Data Model FA1004 FA1004N FA1204 FA1204N FA2004 FA2004N FA2204 FA2204N Picture Max Capacity 100g 120g 200g 220g Accuracy class Min readout 0.01g Accuracy 0.1mg Repeatability ±0.0002g Linearity error ±0.0003g Stability time   ≤3S Working temp. 15℃ ~ 35℃ Pan size     standard model φ80mm / optional model φ90mm Dimensions 300*200*295 mm Power supply    power adapter Calibration mode  external calibration/internal calibration G.W. 6.0kg N.W. 5.0kg Packing size 425*320*415 mm Communication interface   RS232(USB interface optional) read more

HANDPI - LX-F Shore Durometer Sponge Foam Hardness Tester Brand: HANDPI Model: LX-F Introduction: LX-F type sponge durometer is suitable for the determination of soft foam, polyurethane foam rubber products hardness. it will be different with the other hardness tester In the aspects of using. When using, the presser foot directly contact to the sample, and see its own weight as force measurement load.   Specification: Model LX-F Scope of pressure needle route 0 ~ 2.5millimeters The scale value 0-100 degrees The force of pressure needle end 550mN~4300mN(56~438.5g)   The Method of Use: 1. Handheld the middle of the instrument, located the hardness tester gently on the plane specimens which is bigger than presser foot (or specimen). 2. Reading out the value in 1 seconds when durometers’ presser foot contact with the sample smoothly. 3. The tick of pointers is the hardness value of sample (specimen). 4. In order to improving the accuracy of measurement, you should put the sample on a flat plate glass or plate. 5. Each measuring point should be measured only one time, the measuring point at a distance of more than 25mm of different parts from the same sample. should be more than 5 points. 6. To take the average of measurement results, namely it’s the hardness value of the materials. read more

Foam Density Meter/ Foam Density Balance Brand: Rankconn Instruments Model: ALD-320S Product Introduction: High-precision touch screen solid density meter is based on ASTM D792, ASTM D297, GB/T1033, GB/T2951, GB/T3850, GB/T533, HG4-1468, JIS K6268, ISO 2781, ISO 1183, GB/T208, GB/T5163 , GB/T 1933, GB/T4196, GB/T4123, GB/T5586, JB/T7780 adopt the principle of Archimedes' water displacement method. Widely used to test any irregular density greater than 1 or less than 1 or less rubber, plastics, wires and cables, food, composite materials, cosmetics, shoe materials, glass, precious metal hardware, plastics, wires and cables, auto parts, magnetic iron cores, powders Metallurgy, micro fans, tires, etc.; can directly read the average weight in air, average weight in water, and density, volume, and percentage of samples of solids, particles, films, and floating bodies. Features 1.  Built-in temperature sensor can automatically realize temperature compensation function 2.  Using sensors imported from Germany HBM, the weighing is stable and the density value is accurate. 3.  5-inch touch screen operation, easy to operate, built-in guided test step prompts, simplifying and speeding up the operation process 4.  Solution compensation setting, using water as medium, other liquid media can also be used 5.  Automatically store 100 sets of test values, and automatically calculate the average, maximum and minimum values 6.  The upper and lower limits of the density of the test product can be set to judge whether the material is qualified or not. It has a buzzer function. 7.  Standard RS232 printer interface (USB interface can be customized), which can be connected to thermal printers, label printers and computers, and can customize printed content such as tester name, sample name, company name, etc. 8.  Multi-function host, optional liquid accessories can be used to test the density of liquids, optional powder devices can be used to test the true density of powders, and a density meter can be used to test solids, liquids and powders. 9. The stability time, zero point and response speed of the density meter can be adjusted by yourself according to the laboratory test environment Specification Model ALD-320S Weighing range 0.001g-320g Density readability 0.0001g/cm3 Density test platform Precision aluminum alloy one-piece molding Density test range Density＞1,＜1 can be tested Measurement types Any irregular solids, particles, and floating bodies can be measured The results show Density, volume, volume percentage, density average, density minimum, density maximum Measurement principle Archimedes principle buoyancy method Measurement time About 5 seconds Display 4.3”   industrial touch screen Sink PC material one-piece injection-molded transparent sink (size: length 15.3 × width 10.7 × height 8.0cm) Parameter settings Water temperature setting, measurement solution density compensation setting, standard material density setting, standard volume setting Data statistics Automatically save 100 groups of density values Correction method Single point automatic correction, multi-point automatic correction Data interface Standard RS-232 interface, customizable USB interface Power supply voltage AC100V~240V 50HZ/60HZ Package Size Length 42.5 × Width 17.5 × Height 32.5cm read more

Elitech LD-100+ Heated Diode Refrigerant Leak Detector HVAC AC Sniffer Automotive Brand: Elitech Model: LD-100+   Product Introduction: Elitech LD-100+ is a portable refrigerant leak detector using the heated diode gas sensor and precise control circuits, which enable the device to detect all halogen refrigerants. High sensitivity, fast response, stable performance and multiple functions make your job easier and more convenient. This is achieved automatic and manual mode suitable for locating leaks in various complex environments. In addition to the supreme performance and functional advantages, it offers a new suction structure design that increases the sensitivity while having the anti-water absorption function at the same time.   Feature: 【Detect Multiple Refrigerants】Triggers on R290/R11/R22/R404a/R410a/R600a/R1234yf and all halogenated refrigerants including CFCs, HFCs, HCFCs, HCs, HFOs, and blends. 【2 Detection Mode】Automatic and manual mode suitable for locating leaks in various complex environments. 【Fast Response】 Warms up in the 30s and responds in 3s; 3 adjustable sensitivity with maximum sensitivity 0.11oz/yr. 【Anti-water Absorption Design】The new pump-suction structure increases the sensitivity while having the anti-water absorption function at the same time 【Safe and Reliable】Meets CE and EN14624 industrial standards.   Specification: Model LD-100+   Sensor type Heated diode gas sensor   Minimum detectable leakage ≤3 g/year   Reaction time ≤3 seconds   Warm-up time  30 seconds   Reset time ≤10 seconds   Operating temperature range 0-50℃   Operating humidity range  : <80%RH (non-condensing)   Applicable refrigerant CFCs, HCFCs, HFCs, HCs and HFOs Sensor lifetime  ≥1 year Reset Automatic/manual Probe length 420mm(16.5in) Battery life 7 hours           Package includes: 1 X LD-100+ leak detector ( excluding sensor) 1 X Heated diode gas sensor 3 X AA alkaline battery 1 X Packing box 1 X Performance report   read more

AZOVTES – Dissolved Oxygen Meter AE6607 Brand: Azovtes Model: AE6607 Product Specification: read more

RANKCONN - Ultrasonic Cleaner Brand: Rankconn Instruments Model: 165SD Product Introduction: Ultrasonic cleaner bath is an equipment that works through high-frequency sound waves transmitted through liquid to scrub clean the surface of immersed parts. The high-frequency sound waves, typically 40 kHz, agitate the liquid solution of water or solvent, and cause the cavitation of solution molecules. Product Specification:     Model     Capacity     Frequency   Ultrasonic Power (W)   Heating Power (W)   Tank Size (LxWxH mm)     Temp. (℃)     Timer (Min) 165SD 165 40 2880/3000 3000 750x550x400 05-90 0-30 read more

Hand-held Vibration Testers Brand: Uni-T Model: UT311A, UT312A Product Description: UT310A series is a handheld vibration tester which consists of acceleration sensor and digital display circuit. It is mainly used to measure vibration acceleration, velocity and displacement of mechanical equipment. It has the advantages of wide range, easy operation and convenient carrying. It is an ideal inspection tool that can be used for patrol detection of equipment vibration in power, metallurgic and petrochemical industries.   Features: Certificates: CE, UKCA Languages: EN, FR, DE, IT, ES, SV, PL, CZ ● Acceleration/velocity/displacement measurement ● High/low frequency acceleration modes ● Multiple probes ● High sensitivity sensor ● Come with flashlight ● LCD TFT and automatically rotatable screen ● Rechargeable lithium battery ● Simple design and compact structure   Specification: Model UT311A UT312A Parameter Range Frequency Resolution Accuracy Acceleration (PEAK) 0.1-199.9m/s² LO: 10Hz-1kHz 0.1m/s² ±(5%+2dgts) HI: 1kHz-15kHz Velocity (RMS) 0.1-199.9mm/s 10Hz-1.5kHz 0.1mm/s Displacement(P-P) 0.001-1.999mm 10Hz-1kHz 0.001mm ±(10%+2dgts) Automatically rotatable screen √ High/Low frequency acceleration √ Datahold √ Flashlight √ LCD type 2.4″ TFT color screen, full view LCD backlight √ Auto power off 5 minutes without operation Probes Long and short probes (optional), magnetic sucker (UT312A only) Battery indication √ Battery type 1350mAh/3.7V lithium battery Charging interface Type-C Charging voltage DC 5V Charging time About 3h Battery duration About 12h Operating temperature and humidity 0℃~40℃; ≤80%RH, non-condensing Storage temperature -20℃~60℃ General Characteristics: Standard accessories Long and short probe, U-type magnetic sucker (UT312A only), USB-C charging cable, User manual, Safety instructions Productsize UT311A: 180×28×64mm (including the short probe); UT312A: 168×28×64mm Product weight UT311A: About 191g (including the short probe); UT312A: About 364g (including the short probe) read more