UNITTA - Optional microphone/sensor Brand: Unitta Model: TM-YOKO, TM-Long2, TM-COM, TM-DGS (can also be used for old products U-508, U-507, U-505, U-305, and U-303)     Horizontal arm microphone (product number: TM-YOKO) The horizontal arm microphone has a microphone on the side, so measurements can be taken even in places where there is a narrow gap between the back of the belt and the machine. (Thickness 10.0mm x Width 20mm/Total length 170mm)         Long arm microphone (model number: TM-LONG2) A type with a longer arm (total length 350mm) compared to the standard microphone (total length 170mm). (Microphone outer diameter φ 12.5mm/total length 350mm)     Corded microphone (product number: TM-COM) A 1m long corded microphone that can measure belts located deep inside machines that would be difficult to measure with a standard microphone. (Microphone outer diameter φ 12.5mm/total length 1m)       Electromagnetic sensor (product number: TM-DGS) Since the sensor captures changes in magnetic force rather than sound waves, it is possible to measure steel wires, steel belts, etc. Even in environments where rubber belts are susceptible to noise (background noise) and cannot normally be measured with a microphone, measurements can be made by applying a thin magnetic material (to the extent that it does not affect the natural frequency). (total length 1m)     read more

UNITTA GATES -  SONIC Belt Tension Meter U-550C Brand: Unitta – Japan Model: U-550C Specification:   Model name U-550C Model number TM-5550 Measurable range 10Hz~5,000Hz Battery Alkaline battery (Triple A Type x 2 pieces) Rohs Certified Come with accessories Flexible type sensor (TM-YOKO) Soft case for carrying Two triple A batteries USB cable is not attached read more

3NH - Benchtop Grating Spectrophotometer  Brand: 3NH Model: YS6060 Introduction YS6060 is a benchtop grating spectrophotometer which is developed by 3nh independently with independent intellectual property. YS6060 has many features, like 7 inches TFT capacitive touch screen display, full illuminants, reflective d/8 and transmissive d/0 geometry(including or excluding UV). With very stable and precise color measurement, large storage and powerful PC software all makes YS6060 ideal for color analysis within R&D and laboratory environments. Features 1, High configuration of hardware: 7 inches TFT Color Capacitive Touch-screen Display; Bluetooth 2.1; Concave Grating. 2, Double Array 256 Image Element CMOS Sensor; Long life-span stable LED, UV LED. 3, With reflective and transmissive spectrum, accurate Lab value, good to calculate color formula and do precise color transmission. 4, Auto identify measuring aperture. Freely switchable between 4 measuring apertures: φ25.4mm/15mm/8mm/4mm. Users also can customize apertures. 5, Built-in temperature sensor to monitor and compensate the measuring temperature to ensure the measurement more precision. 6, Wavelength range 360nm – 780nm. Built-in 400nm cut off/420nm cut off/460nm cut off (only xenon lamp edition), more professional in UV measurement. 7, Independent light source detector, continuously monitor the condition of light sources to ensure the light source reliable. 8, Multiple measurement modes: Quality Management Mode, Sample Mode; Meet more users’ requirement. 9，A variety of optional accessories: Reflection sample holding tool, transmission fixture, micro 4mm aperture transmission test components, instrument inversion test components, applicable to more working conditions; 10, Big capacity data storage, for 40000 pieces test result. 11, Built-in camera locating. 12, More powerful extended functions at the PC software.   Application Industry YS6060 benchtop spectrophotometer is used to do precise color analysis and transmission in laboratories. It can be widely applied in different industries, such as plastics, electronics, paint and ink, printing, garments, leather, paper, auto, medical, cosmetics, food, science institutes, laboratories.   Technical Specification Model YS6060 Benchtop Spectrophotometer Optical Geometry Reflect: di:8°, de:8°(diffused illumination, 8-degree viewing angle) ;          SCI (specular component included)/SCE (specular component excluded) ; Include UV / excluded UV light source Transmittance: di:0°, de:0° (diffuse illumination: 0° viewing) ;                      SCI (specular component included)/SCE (specular component excluded) ; Include UV / excluded UV light source; Haze(ASTM D1003), Conforms to CIE No.15，GB/T 3978,GB 2893,GB/T 18833, ISO7724/1, ASTM E1164, DIN5033 Teil7 Application It is used for accurate analysis and transmission of laboratory color.     Apply in paints, inks, textiles, garments, printing and dyeing, printing etc industries for color transfer and quality control. Integrating Sphere Size Φ154mm Light Source 360 nm to 780 nm, Combined LED Light, 400nm cut-off light source,420nmCut-off light source Spectrophotometric Mode Concave Grating Sensor 256 Image Element Double Array CMOS Image Sensor Wavelength Range 360-780nm Wavelength Interval 10nm Semiband Width 5nm Measured Reflectance Range 0-200% Measuring Aperture Reflective : Φ30mm/Φ25.4mm, Φ18mm/Φ15mm, Φ10mm/Φ8mm, Φ6mm/Φ4mm; Transmissive : Φ25.4mm;                          Remark: 1. Automatic identification of switch caliber   2. Customized Configuration caliber and lens position Specular Component Reflectance: SCI&SCE  / Transmittance: SCI&SCE Color Space CIE LAB,XYZ,Yxy,LCh,CIE LUV,Musell,s-RGB,HunterLab,βxy,DIN Lab99 Color Difference Formula ΔE * ab ,ΔE * uv ,ΔE * 94 ,ΔE * cmc(2:1) ,ΔE * cmc(1:1) ,ΔE * 00 , DINΔE 99 ,ΔE (Hunter), Other Colorimetric Index WI (ASTM E313, CIE/ISO, AATCC, Hunter), YI (ASTM D1925, ASTM 313), MI (Metamerism Index), Staining Fastness, Color Fastness, Color Strength, Opacity, 8° Glossiness,Gardner Index,APHA/ Pt-Co Index, 555 Index, Haze(ASTM D1003),Saybolt，Color code (ASTM D1500) Observer Angle 2°/10° Illuminant D65,A,C,D50,D55,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,DLF,TL83,TL84,TPL5,U30 Displayed Data Spectrogram/Values, Samples Chromaticity Values, Color Difference Values/Graph, PASS/FAIL Result, Color Offset Measuring Time About 2.4s (Measure SCI & SCE about 5s) Repeatability Spectral reflectance: Φ25.4mm/SCI, Standard deviation within 0.04% (400 nm to 700 nm: within 0.04%) Chromaticity value:Φ25.4mm/SCI, Standard deviation within ΔE*ab 0.01 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration)                                                                                        Spectral Transmittance: Φ25.4mm/SCI, Standard deviation within 0.05% (400 nm to 700 nm: within 0.04%) Chromaticity value:Φ25.4mm/SCI, Standard deviation within ΔE*ab 0.02 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration) Inter-instrument Error Φ25.4mm/SCI, Within ΔE*ab 0.12   (Average for 12 BCRA Series II color tiles) Dimension L*W*H=370x300x200mm Weight Approx. 9.6kg Power AC 24V, 3A Power adapter power supply Illuminant Life Span 5 years, more than 3 million times measurements Display 7-inch TFT color LCD, Capacitive Touch Screen Data Port USB & Bluetooth & Print serial port Data Storage Standard 5000 Pcs, Sample 40000 Pcs Language Simplified Chinese, Traditional Chinese, English, (Optional Customized German, French and Spanish) Operating Environment 0~40℃, 0~85%RH (no condensing), Altitude < 2000m Storage Environment -20~50℃, 0~85%RH (no condensing) Standard Accessory Power Adapter, User Guide, CD Disk(PC Software), USB cable, Standard Calibration Board, Black Calibration Cavity, Transmission black baffle, Sample holder, 25.4mm caliber, 15mm caliber, 8mm caliber, 4mm caliber,Transmissive Test Component,Micro Aperture(4mm) transmission test clamp component Optional Accessory Micro-printer,  Instrument inversion components,culture dish Notes: The specifications are subject to change without notice. read more

Ultrasonic Sound Intensity Meter / Ultrasonic Cavitation Energy Meter Brand: Rankconn Instruments Model: RC-200E   Product Descriptions Ultrasonic sound intensity meter is a device used to measure the intensity of ultrasonic waves in liquids. It is mainly suitable for measuring industrial applications such as ultrasonic cleaning and ultrasonic liquid treatment. The main measurement parameters are ultrasonic sound intensity, ultrasonic frequency, cavitation intensity, etcs.   Features & Application Measure your cleaning tank performance Set your tank energy level Establish tank to tank uniformity Map the energy variations in your tank   Technical Specification   Model RC-200E Measuring Range (W/cm²) 0.01–25.40 Measuring Frequency (kHz) 10.0–200.0 Data Display Instant value, Max value, Instant frequency, Sound intensity curve, Recorded value Storage Groups 200 Resolution 1% Storage Interval Optional 1–600 s Data Export Connectable to PC/PLC Frequency Display Available Display Type 3.2'' TFT (320×240) Power Supply 3.7 V Rechargeable Lithium Battery Probe Specifications 40 cm / 50 cm / 60 cm (Optional anti-corrosion probe) read more

  MITECH 934-1 Barcol Impressor with Single Brackets Brand: MITECH Model: 934-1   Product Introduction: MITECH 934-1 Barcol impressor, based on mechanical pressure principle, its intelligent design making it possible to test the hardness on site conveniently and quickly. Mitech 934-1 Series Barcol Impressor with Single Bracket is the latest product of indentation hardness tester. Equipped with rotating bracket for locating, it can effectively improve the stability of the device, thus improve the accuracy. Digital display can offer with better measuring experience. The calibration can be achieved by simply pressing one key without dismantling. The device is so portable that user can operate with one single hand. It is widely used in aluminium processing and fiberglass and other hard plastic manufacturing industry. It can meet most of the needs during production processing hardness test in hard plastic manufacturing industry. It is a necessary professional testing equipment to improve the production rate and cost savings.   Technical Specification:   Measurement range 0～100HBa Display resolution 0.1 Hba Display error ±2.0 HBa （42～52 HBa）；±1.0 HBa（84～88 HBa） Repeatability error ±2.5 HBa（42～52 HBa）；±1.5 HBa（84～88 HBa） HBW range 25～135HBW Indenter 26 ° fructo-conical, face diameter 0.176mm Material Pure aluminium, aluminium alloy, glass steel, hard plastic Model M934-1 Weight 0.48Kg     Function & application: Aluminium sheet Thick-walled aluminium Aluminium wheels Aluminium alloy castings, forgings, die castings Aluminium doors and windows, curtain walls, fire ladder, glass fibre reinforced plastic bathroom products, hull, storage tank, artificial marble after installation.   Working Principle: MITECH 934-1 Barcol impressor is an indentation hardness tester. The depth of the indenter (pressed into the surface) is inversely proportional to the hardness of the material, so the indenter depth can represent the hardness of the workpiece.     Working Conditions: The depth of workpiece to be measured must be over 1.5mm; Sample surface coating will seriously affect the measurement accuracy, with sandpaper or solvent to remove the coating after the hardness measurement; The coating on the surface will affect the accuracy, user need to get rid of it before measuring; The instrument should be used in environments with strong vibrations, damp and corrosive gases   Instrument Features: Portable and easy to operate with single hand, small size, light weight, can do fast hardness test of workpiece; Easy to learn, no high-skill skills of the operation requirements, the human operation of the measurement results less impact, very suitable for the production site for rapid hardness testing of materials; Can do fast NDT test on site of sale or work without sampling; Compared with Webster hardness tester, there is no limits of workpiece size, can do the test directly on the surface; Wide measurement range, capable of hardness test for pure aluminium and aluminium alloy products; Widely used in aluminium processing and fiberglass and other hard plastic manufacturing industry. Its advanced type can also measure soft plastic, metal and leather; Equipped with rotating bracket for locating, it can effectively improve the stability of the device, thus improve the accuracy; Digital display screen, making the best measuring experience; Can meet the standard of GB/T3854-2005(PRC) and ASTM B648-2000(USA)    read more

UV Accelerated Weathering Aging Test Chamber (Horizontal Type) Model: RC-UV3 Product Introduction:  This device is suitable for the accelerated aging test by exposing to light and water. It is used to predict relative durability of paint, coating, plastic and other non-metallic materials. It is suitable for observing physical properties of durable materials especially, such as gloss reduction, haze, strength reduction, pulverization, cracking, blistering, embrittlement and faded, etc.   Like other accelerated tests in laboratories, we can’t use the test result of this device replace natural exposure to determine actual durable time of materials. But this device is relatively practical on assessing the anti-aging performance of materials rapidly, selecting or improving the new and old formulas, monitoring the quality of products by providing the contrastive experiment conditions.   Ultraviolet light is the main light factor result in durability reduction of outdoor products. Combine with fluorescent tubes possess stable spectral energy distribution and low price, ultraviolet aging test chamber becomes the most popular test chamber in the world because of its quick, convenient and economic advantages.   Because water is an important factor of accelerating aging. This device adopts the way of water spraying to simulate the effect of moisture. It can close to some environmental conditions of final use by setting the spray time, such as temperature change or rain wash result in mechanical erosion.   This model can also adjust the rate of photochemical reactions by temperature control mechanism in the appropriate range. To satisfy the durable demands of weather resistance tester, this device structures adopt corrosion resistant stainless-steel materials widely. Its design is simple, easy to use and maintenance.   You can get to know damages level of materials in a short time and judge the quality gap between test products and reference samples as long as you pay low use cost.     Standards: IEC61215, ASTM D4329, D499, D4587, D5208, G154, G53; ISO 4892-3, ISO 11507; EN 534; BS 2782; JIS D0205; SAE J2020, etc. Features: UV accelerated weathering aging test chamber is designed according to uses' operation, it's easy to operate, safe and reliable. The thickness of specimen installation is adjustable and the specimen installation is fast and convenient. UV accelerated weathering aging test chamber door rotating up does not interfere with the operation and the tester takes a very small space only. UV accelerated weathering aging test chamber has unique compensating system can be contented by tap water. The heater is under the container rather than in the water, which is long life, easy to maintain. The water level controller is outside the box, easy to monitor. UV accelerated weathering aging test chamber has truckles, convenient to move. Computer programming is convenient, automatically alarming when incorrect operated or faulted. UV accelerated weathering aging test chamber has Chinese and English instruction book, convenient to consult.  Technical parameters:   Chamber Dimension 1100*580*350mm Materials Inside and Outside SUS#304 stainless steel Temperature range RT+10~70°C Temperature uniformity ±2°C Temperature fluctuation ±0.5°C Temperature control PID SSR control Humidity range: 95%RH Irradiance intensity 0.3-1.55 W/m2 (Adjustable) Controller Korean TEMI 880 programmable controller Control mode Balance temperature humidity control (BTHC) Test Cycle setting Illumination, condensation and water spray test cycle is programmable Fluorescent UV Lamp power 40W/Piece 8pcs 320W Distance from sample to lamp Adjustable Centre distance between the lamp 70mm Wavelength ultraviolet light UV-A: 315-400nm  (4pcs) UV-B: 280-315nm (4pcs) (8pcs, 2000h lifetime) Irradiation black panel temperature 45°C~80°C Standard Specimen Size ≤1100 x 500mm Support Irregular Sample Shape Water consumption 8L per day Testing time 0~999H, adjustable Power 220V/50Hz /±10% 4.5KW Protection system Overload short circuit protection, over temperature protection, water lacking       read more

SMART SENSOR - Digital Sound Level Meter AR824 Brand : Smart Sensor Model : AR824 Product Features 1 - This unit was designed according to the IEC651 TYPE2& ANSI S1.4 TYPE2 for sound level meters. 2 - Instantaneous sound measure function. 3 - Measurement range: 30-130 decibel 4 - With two equivalent weighted sound pressure levels, A and C. 5 - Fast & Slow dynamic characteristic modes. 6 - AC and DC signed output for frequency analyzer level recorder, FFT analyzer, graphic recorder etc. Technical Specifications 1 - Accuracy: +/- 1.5 dB (under reference conditions) 2 - Frequency range: 31.5 Hz to 8.5K Hz 3 - Linearity range: 50 dB 4 - Measuring level: 30 130 dBA, 35-130 dBC 5 - Frequency weighting: A, C 6 - Digital display: 5 digits      Resolution 0.1dB      Display 0.5 secretary 7 - Bar graph: 50 dB scale at 1 dB step for monitoring current sound pressure level display period: 50 mS 8 - Level ranges 30-80 dB 50-100 dB 60-110 dB 80-130 dB 9 - Over indicate over range:      Under indicate less than lower limit of the range. 10 - AC output: 0.707 Vrms at FS output impendance approx 600 11 - DC output: 10 mV / dB output impedance approx 100 12 - Time weighting: Fast / Slow 13 - Microphone: 1/2 inch Electret Condenser microphone 14 - Max: Maximum hold 15 - Power supply: 4*AA 1.5V alkaline cells or DC 6V       100(Maximum DC 9V)        Power life: About 30 hrs (calkaline cells) 16 - Self calibration time: 10 sec (every turn on) 17 - Operating Temperature: 0 to 40'C        Operating Humidity: 10% to 80% RH 18 - Storage Temperature: -10 to 60'C        Storage Humidity: 10% to 70%RH 19 - Dimensions: 265(L)*72(W)*35 (H) mm 20 - Weight: 300g (including batteries) read more