- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
RANKCONN - Carrier Tape Peel Strength Tester RC-108
| Previous | 28 / 841 | Next |
RANKCONN - Carrier Tape Peel Strength Tester RC-108
RANKCONN - Carrier Tape Peel Strength Tester RC-108
Brand: Rankconn Instruments
Model: RC-108
Summary:
This machine is specially developed and designed for the peel-off test of tapes. It is controlled by a microcomputer chip and can conduct tests on the tensile force and peel-off force of materials. It is fully computerized and has an automatic reset function. The test software can output test graphs and tabular data as the basis for material testing.
This machine adopts advanced microprocessor control system, which makes the speed of grinding plate and grinding head stepless adjustable, and the sample preparation pressure and time setting intuitive and convenient. The operator only needs to replace the grinding plate or sandpaper and fabric to complete the operation of grinding and throwing process, so that the machine shows a more extensive application. This machine has the rotation direction, the plate can be replaced quickly; multi-sample gripper and pneumatic single point loading, automatic distribution, smooth rotation, reliability, low noise and the rigidity of casting aluminum base.
Features:
Technical Parameters:
Brand: Rankconn Instruments
Model: RC-108
Summary:
This machine is specially developed and designed for the peel-off test of tapes. It is controlled by a microcomputer chip and can conduct tests on the tensile force and peel-off force of materials. It is fully computerized and has an automatic reset function. The test software can output test graphs and tabular data as the basis for material testing.
This machine adopts advanced microprocessor control system, which makes the speed of grinding plate and grinding head stepless adjustable, and the sample preparation pressure and time setting intuitive and convenient. The operator only needs to replace the grinding plate or sandpaper and fabric to complete the operation of grinding and throwing process, so that the machine shows a more extensive application. This machine has the rotation direction, the plate can be replaced quickly; multi-sample gripper and pneumatic single point loading, automatic distribution, smooth rotation, reliability, low noise and the rigidity of casting aluminum base.
Features:
- Utilizing the latest control board card, achieving a higher sampling rate Utilizing the American Transducer Load Sensor for better measurement accuracy
- Employ Taiwan TBI ball screws for better transmission accuracy.
- Utilizing servo drive ensures greater accuracy.
- Adopting professional processing techniques can better ensure the quality.
Technical Parameters:
| Model | RC-108 |
| Capacity selection | 50N, 100N, 200N, 500N (optional) |
| Monitor | Display mode of computer |
| Force resolution | 1/250,000 |
| Force accuracy | 0.5% |
| Travel resolution | 1/250,000 |
| Control mode | Full computer operation mode |
| Experimental itinerary | 500m |
| Experimental width | φ140mm |
| Experimental speed | 0 -500mm/min -Computer-set value |
| Force unit conversion | kgf£¬N£¬Ibf£¬g£¬ton£¬Mpa |
| Shutdown mode | Overload shutdown, emergency stop button, automatic shutdown upon specimen failure, automatic shutdown upon setting of upper and lower limits, automatic reset function |
| Machine size | 800 x 300 x 300mm (W×D×H) |
| Machine power | Servo motor drive, synchronous wheel and precision ball screw transmission |
| Power | 200W |
| Machine weight | About 100 kilograms |
| Power consumption | 220V 50/60HZ 5A |
| Standard configuration | Fixture set 1, computer software, data cable |