- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
TIME - Ultrasonic Thickness Gauge TIME TT130
| Previous | 28 / 503 | Next |
TIME - Ultrasonic Thickness Gauge
Product Introduction:
Product Specification:
Material : Metallic & Non-Metallic
Measuring units : mm
Range (probe dependant) : 1.2 to 225.0 mm
Frequency : 5 MHz
Accuracy : +/-1% of
Material Thickness + 0.1 mm
Display : 4 digit LCD
Resolution : 0.01 up to 99.99 mm
Memory : 10 readings 0.1 from 100.0 to 225 mm
RS232 : no
Sound velocity range : 1000 to 9999 m/sec
Sound Velocity : 5 Preset Sound Velocities
Probe Tip diameter : 12 mm
Auto power off : yes
Pipe Diameter Limits : 20 mm x 3 mm
Power Supply : 2 x 1.5 AA Alkaline
Calibration : Automatic Zero Point
Alarm limit setting : no
Working Temp. : -5 to 40 deg C
Battery Life : 250 hours per battery set
Relative Humidity : < 90%
Dimensions : 126 x 68 x 23 mm
Surface Temperature : < 60 deg C Weight : 170g
Brand: TIME
Model: TT130
Product Introduction:
TT130 is a hand held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and nonmetallic materials e.g. aluminium, titanium, plastics, ceramics, glass and other good ultrasonic wave-conducting as long as the material has parallel top and bottom surfaces. With uses in many areas of industry TT130 can perform precise measurements on various types of raw materials, components parts, and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion. TT130 is very easy to use, after a simple calibration to a known thickness or sound velocity, the gauge will give fast and accurate readings in millimetres. Sound velocities for 5 different materials can be pre-set and 10 thickness readings can be stored in the memory.
Product Specification:
Material : Metallic & Non-Metallic
Measuring units : mm
Range (probe dependant) : 1.2 to 225.0 mm
Frequency : 5 MHz
Accuracy : +/-1% of
Material Thickness + 0.1 mm
Display : 4 digit LCD
Resolution : 0.01 up to 99.99 mm
Memory : 10 readings 0.1 from 100.0 to 225 mm
RS232 : no
Sound velocity range : 1000 to 9999 m/sec
Sound Velocity : 5 Preset Sound Velocities
Probe Tip diameter : 12 mm
Auto power off : yes
Pipe Diameter Limits : 20 mm x 3 mm
Power Supply : 2 x 1.5 AA Alkaline
Calibration : Automatic Zero Point
Alarm limit setting : no
Working Temp. : -5 to 40 deg C
Battery Life : 250 hours per battery set
Relative Humidity : < 90%
Dimensions : 126 x 68 x 23 mm
Surface Temperature : < 60 deg C Weight : 170g