- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
IMADA - Torque Calibrator for Electric Drivers i-80
| Previous | 386 / 503 | Next |
IMADA - Torque Calibrator for Electric Drivers i-80
Brand: Imada - Japan
Model: i-80
Unique Smart Adapters
The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software. The Series i torque calibrators are compatible with Imada’s SW-1SV-USB software.
The peak torque or peak down torque in breakaway tests is captured automatically. The Cedar Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and N-m.
What’s Included
All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC charger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.
Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester).
Product Features:
Technical Specification:
Brand: Imada - Japan
Model: i-80
Products Description:
The Cedar i-80 torque calibrator measures the peak torque non-impact electric/air drivers apply to a screw. Under tightened bolts and screws do not generate sufficient clamp force and can lead to loosening and assembly failure. Over tightening, past the yield point, permanently deforms the screw joint and can also lead to failure which is why proper tightening torque is so important. Manual torque wrenches can also be calibrated.Unique Smart Adapters
The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software. The Series i torque calibrators are compatible with Imada’s SW-1SV-USB software.
The peak torque or peak down torque in breakaway tests is captured automatically. The Cedar Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and N-m.
What’s Included
All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC charger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.
Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester).
Product Features:
- Wide measuring range up to 70 lbf-in
- Selectable units lbf-in, Kgf-cm, N-cm and N-m
- Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
- 2 – driver adapters included: i-80 comes with smart adapters
- Peak, Real Time and Peak Down measuring modes (selectable)
- Measure both clockwise and counterclockwise
- USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
- Statistics: number of data, Max, Min, Avg
- Heavy-duty metal construction
- Runs on internal NiMH batteries or AC adapter
- 3/8″ drive for socket wrenches
Technical Specification:
| Adapter | Model | Range lbf-in | Top Screw | Operational life | |
| i-8 | Smart |
OW-025E OW-10E |
2 9 |
6-32 6-32 |
10,000 hrs 8,000 hrs |
| i-80 | Smart |
OW-20E OW-60E |
18 53 |
8-32 1/4-20 |
5,000 hrs 5,000 hrs |
| CD-150M | Spring |
SJ-50E SJ-120E |
8~50 50~175 |
5/16-18 3/8-16 |
2,500 uses 2,500 uses |
| DI-25 | Spring |
SJ-50E SJ-200E |
8~50 50~175 |
5/16-18 3/8-16 |
2,500 uses 2,500 uses |