- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
RANKCONN - Mechanical Stability Testing Machine (MST)
| Previous | 457 / 498 | Next |
How to use "Mechanical Stability Testing Machine (MST) "
Mechanical Stability Testing Machine (MST)
Brand: Rankconn Instruments
Model: HUD-R109
Product Description:
The high-speed mechanical stability tester of latex meets the requirements of GBT 8301-2008 Determination of Mechanical Stability of Concentrated Natural Rubber Latex and SHT 1151-1998 High-speed Mechanical Stability Determination of Synthetic Latex. This instrument is mainly suitable for latex production units and scientific research institutes to test the mechanical stability of natural latex and synthetic latex. It is an indispensable instrument for improving the quality of latex.
Technical parameter:
Guidance:
After the instrument is unpacked and taken out, put it on the workbench. By rotating the feet, each foot can stably touch the workbench. Turn on the power and select the disc you need, tighten it to the mixing shaft, and place the latex to be tested. Pour into a glass cup, put the cup on the instrument cup holder, move the cup holder up to a fixed position and clamp it tightly, click the ''RUN'' button on the controller to start the test.
The default maximum speed of the instrument is 14000r/min (the speed knob is adjusted to the maximum is 14000), and it can reach 24000r/min by setting separately.
Configuration:
Glass container -- 2 pieces
Disc --2 pieces
Stirring rod -- 1 piece
Allen wrench -- 1 piece
O-ring --2 pieces
Cooling water pump -- 1 set
Cooling water pipe --2 pieces-
Brand: Rankconn Instruments
Model: HUD-R109
Product Description:
The high-speed mechanical stability tester of latex meets the requirements of GBT 8301-2008 Determination of Mechanical Stability of Concentrated Natural Rubber Latex and SHT 1151-1998 High-speed Mechanical Stability Determination of Synthetic Latex. This instrument is mainly suitable for latex production units and scientific research institutes to test the mechanical stability of natural latex and synthetic latex. It is an indispensable instrument for improving the quality of latex.
Technical parameter:
| 1. Operating conditions | temperature 10¡æ¡«40¡æ, humidity <85%RH |
| 2. Stirring speed | 14000rpm±200rpm |
| 3. Latex container | flat-bottomed glass bucket, height>100mm, inner diameter 58mm, outer diameter 63mm. |
| 4. Diameter of the low end of the stirring rod | 6.3mm |
| 5. Stirring plate |
Diameter 36.12±0.03mm, thickness 1.57±0.05mm (suitable for synthetic latex) |
|
Diameter 20.83±0.03mm, thickness 1.57±0.05mm (suitable for natural rubber latex) |
|
| 6. Indication error≤0.1% | |
| 7. Measurement resolution | 1 r/min |
| 8. Display mode | inverter LED display |
| 9. Maximum speed | 24000r/min |
| 10. Minimum speed | 2000r/min |
| 11. Power supply | 220V ± 10%, 50H2, 1500W |
| 12. Dimensions | 400mm×350mm×720mm |
Guidance:
After the instrument is unpacked and taken out, put it on the workbench. By rotating the feet, each foot can stably touch the workbench. Turn on the power and select the disc you need, tighten it to the mixing shaft, and place the latex to be tested. Pour into a glass cup, put the cup on the instrument cup holder, move the cup holder up to a fixed position and clamp it tightly, click the ''RUN'' button on the controller to start the test.
The default maximum speed of the instrument is 14000r/min (the speed knob is adjusted to the maximum is 14000), and it can reach 24000r/min by setting separately.
Configuration:
Glass container -- 2 pieces
Disc --2 pieces
Stirring rod -- 1 piece
Allen wrench -- 1 piece
O-ring --2 pieces
Cooling water pump -- 1 set
Cooling water pipe --2 pieces-