- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
NIDEC SHIMPO - Digital Stroboscopes with a Built-in Rechargeable Battery DT-315N
| Previous | 37 / 86 | Next |
Digital Stroboscopes with a Built-in Rechargeable Battery
Brand: Nidec Shimpo - Japan
Model: DT-315N
Introduction:
The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source. Power is provided by a dedicated rechargeable NiCd battery.
Features:
A wide measuring range
The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.
Provided with a phase adjustment function
It is possible to move an image while maintaining synchronization.
The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.
Provided with a memory function
The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.
Brand: Nidec Shimpo - Japan
Model: DT-315N
Introduction:
The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source. Power is provided by a dedicated rechargeable NiCd battery.
Features:
A wide measuring range
The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.
Provided with a phase adjustment function
It is possible to move an image while maintaining synchronization.
The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.
Provided with a memory function
The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.
| Measuring/flashing range | 40.0-35,000 rpm (0-35,000 in the external synchronization mode) |
| Model | DT-311N | DT-315N | |
| Number of flashes (rpm) | 40.0 to 35000 0 to 35000 in external sync mode | ||
|
Internal oscillation mode |
Display decomposition function |
0.1: 40.0 ~ 5000 0.2: ~ 8000 0.5: ~ 10000 1: ~ 35000 |
|
| Jump function | Yes (Pressing the dedicated switch doubles or doubles the number of flashes) | ||
| Integer function | Yes (display decimals, do not set) | ||
| Memory function | Yes (memorizes the number of flashes when the power is turned off, and then flashes at that number of flashes when the power is turned on) | ||
|
External sync mode |
input signal |
Voltage input H level: 2.5V to 12V L level: 0.8V MAX Pulse width 50μs or more Input impedance 10kΩ or more |
|
| Speed measurement function | 40.0 to 35000 rpm (disabled during delayed flash) | ||
| Delayed emission |
In the range of 40.0 to 10000 rpm , the delay angle can be set every 0 to 359 ° 1 °, or the delay time can be set every 0 to 2000 ms 1 ms. |
||
| display | 5-digit red LED 7 segment | ||
| Synchronous output signal | 12V voltage signal Pulse width approx. 400μs | ||
| Setter | Multi-rotation encoder, tact switch | ||
| Flash light source | Xenon lamp | ||
| Lamp input | 10W | ||
| Power supply | AC100-120V |
Rechargeable (dedicated NiCd battery) Light emission for about 1 hour continuously or attached AC adapter g (quick charge for 2 hours) AC100V ± 10% |
|
| Luminous timer | Continuous lighting or stop flashing after a set time of 1 to 120 minutes | ||
| Power output for sensor | DC12V 40mA | ||
| Power cord | 2.4m | ― | |
| Operating temperature | 0-40 ℃ | ||
| Mass | 1.2kg | 2.1kg | |
| Accessories | Pistol grip | Dedicated adapter | |