- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
HANNA 每 Total Hardness Test Kit HI 3812
| Previous | 478 / 500 | Next |
HANNA – Total Hardness Test Kit HI 3812
Brand: Hanna
Model: HI 3812
Descriptions:
The HI3812 is a titration-based chemical test kit that determines the total hardness concentration in two ranges: 0.0 to 30.0 mg/L and 0 to 300 mg/L. The HI3812 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 100 tests.
Complete setup
Significance of Use:
Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.
Specifications: HI3812 Total Hardness (*as CaCO₃)
Brand: Hanna
Model: HI 3812
Descriptions:
The HI3812 is a titration-based chemical test kit that determines the total hardness concentration in two ranges: 0.0 to 30.0 mg/L and 0 to 300 mg/L. The HI3812 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 100 tests.
Complete setup
- All required materials are included with the test kit, such as the sample beaker, indicator and reagent bottles, and plastic syringe.
- Readings from 0.0 to 30.0 mg/L are determined to 0.3 mg/L resolution.
- Readings from 0 to 300 mg/L are determined to 3 mg/L resolution.
- There is no need to buy a new kit when reagents are exhausted. The HI3812-100 can be ordered to replace the reagents supplied with the kit.
Significance of Use:
Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.
Specifications: HI3812 Total Hardness (*as CaCO₃)
| Type | Titration |
|
Range |
0.0- 30.0 mg/L (ppm) 0-300 mg/L (ppm) |
|
Smallest Increment |
0-3 mg/L (ppm) 3 mg/L (ppm) |
| Method | EDTA |
| Number of Tests | 100 avg. |
| Ordering Information | HI3812 test kit comes with 30 mL hardness buffer, 10 mL calmagite indicator, 120 mL EDTA solution, 20 mL plastic beaker with cap, 50 mL plastic beaker with cap and 1 mL syringe with tip. |
| Reagent | HI3812-100 total hardness (*as CaCO₃), 100 tests avg. |