- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
STARRET - Countersink Gages
| Previous | 176 / 271 | Next |
STARRET - Countersink Gages
Brand: Starret
Model: 687 Series 82º, 688 Series 90º, 689 Series 100º
Description:
Starrett Countersink Gages are offered in three different angles so that the gage sets on the angular side of the countersink, as opposed to a chamfer gage which sets on the top edge of the chamfer. This gage directly reads the large diameter of the countersink in .002'' or 0.05 mm increments. A set master ring is furnished with each gage for calibration and setting. Press the button on top of the indicator to firmly depress the gage head into the countersink. When the gage is removed, the indicator reading is held in place until the reset button is activated. All ground surfaces are of hardened tool steel. Indicators are AGD design.
Inch Reading Countersink Gages
Millimeter Reading Countersink Gages with Yellow Dials
Brand: Starret
Model: 687 Series 82º, 688 Series 90º, 689 Series 100º
Description:
Starrett Countersink Gages are offered in three different angles so that the gage sets on the angular side of the countersink, as opposed to a chamfer gage which sets on the top edge of the chamfer. This gage directly reads the large diameter of the countersink in .002'' or 0.05 mm increments. A set master ring is furnished with each gage for calibration and setting. Press the button on top of the indicator to firmly depress the gage head into the countersink. When the gage is removed, the indicator reading is held in place until the reset button is activated. All ground surfaces are of hardened tool steel. Indicators are AGD design.
Inch Reading Countersink Gages
| Range | 82º Angle | 90º Angle | 100º Angle | |||
| Catalog No. | EDP No. | Catalog No. | EDP No. | Catalog No. | EDP No. | |
| .020-.170” | 687-1Z | 63698 | 688-1Z | 63702 | 689-1Z | 63706 |
| .160-.360” | 687-2Z | 63699 | 688-2Z | 63703 | 689-2Z | 63707 |
| .360-.560” | 687-3Z | 63700 | 688-3Z | 63704 | 689-3Z | 63708 |
| .560-.780” | 687-4Z | 63701 | 688-4Z | 63705 | 689-4Z | 63709 |
Millimeter Reading Countersink Gages with Yellow Dials
| 0.5-4.3 mm | 687M-1Z | 65003 | 688M-1Z | 65007 | 689M-1Z | 65011 |
| 4-9 mm | 687-2Z | 65004 | 688M-2Z | 65008 | 689M-2Z | 65012 |
| 9-14.2 mm | 687-3Z | 65005 | 688M-3Z | 65009 | 689M-3Z | 65013 |
| 14.2-19.8 mm | 687-4Z | 65006 | 688M-4Z | 65010 | 689M-4Z | 65014 |