Visit
Official Website

MAGNESCALE 每 Digital Gauge (LT20A)

Previous 184 / 271 Next


MAGNESCALE – Digital Gauge
Brand: Magnescale
Model: LT20A
 
Features:
Compact, lightweight, and easy-to-mount counter

  • Compact design: DIN standard size (72 mm x 72 mm / 2.83'' x 2.83'' W x H).
  • Suitable for panel mounting
  • Selectable display resolutions: 0.5/ 1/ 5/ 10 μm
  • BCD and RS-232C I/ O models are available.
  • Reset/preset
  • Peak hold function for measuring max./ min./ peak-to-peak values and GO/NO GO evaluation. ADD/ SUB function (2-axis model only)
  • Data storage: resolution, counting direction, comparator reference points, preset value, mode, BCD sign (B type), communication parameters (C type)
  • Inch/ metric display
  • Applications: automatic sorting and measuring of parts on production lines.
 
Specifications:

Model LT20A-101 LT20A-101B LT20A-101C LT20A-201 LT20A-201B LT20A-201C
Display 6 digit backlit LCD, mode display
I/O Measuring unit input 1 CH 2 CH
I/O connectors*1
BCD*2 - - - -
RS-232C*3 - - - -
RS-TRG*4 - - - -
Reset function Reset key or external input (I/O connectors)
- BCD terminal RS-232C command - BCD terminal RS-232C command
Preset function Preset value set with preset key, recalled with reset key.
- Recalled with BCD reset terminal Set or recalled with RS-232C command - Recalled with BCD reset terminal Set or recalled with RS-232C command
Conparetor function Three-level comparator Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
- Up to 4 values can be set for comparator (key input). Switched with BCD terminal. Set with RS-232C command - Up to 4 values can be set for comparator (key input). Switched with BCD terminal. Set with RS-232C command
Peak hold function Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
- - RS-232C can set or start. - - RS-232C can set or start.
Input resolution 0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mmselectable
Display resolution 0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mmselectable
Direction Can be switched
Reference point function Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed 20 MHz (A/B phase difference)
Addition and subtraction function - A+B, AB, BA can be set with the direction setting.
Alarm Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
- BCD alarm terminal ''H'' (OFF) - - BCD alarm terminal ''H'' (OFF) -
Data storage Resolution, direction, comparator value, preset value, modes, etc.
- BCD sign, etc - - BCD sign, etc -
key lock function key lock and release.
Temperature Operating:040, Storage:-1050
Power consumption*5 4 W 5W 4W 6W 8W 6W
Mass Approx. 200g Approx. 230g Approx. 220g Approx. 210g Approx. 270g Approx. 230g
Power supply Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit DG, DLseries
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peakvalue selected and output. Alerm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
Magnescale reserves the right to change product specifications without prior notice.
For more information please click the link for reference: http://www.magnescale.com/mgs/language/english/product/LT20A.html
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Recent Updates