Visit
Official Website

RENISHAW 每 TP200/TP200B Modular Probes

Previous 194 / 271 Next


RENISHAW – TP200/TP200B Modular Probes
Brand: Renishaw

TP 200 probe body
The TP200 probe incorporates micro strain gauge transducers delivering excellent repeatability and accurate 3D form measurement even with long styli. The sensor technology gives sub-micron triggering performance and eliminates the lobing characteristics encountered with standard probes. The solid-state ASIC electronics within the probe ensure reliable operation over millions of trigger points.

TP200B probe body
The TP200B probe uses the same technology as TP200 but has been designed to have a higher tolerance to vibration. This helps to overcome the problem of 'air' trigger generation which can arise from vibrations transmitted through the CMM or when using longer styli with faster positioning speeds. Please note that we do not recommend the use of TP200B with the LF module or cranked star styli.


Measuring Performance TP 200 TP200B
Principal application DCC CMM where high accuracy measurement is required As TP200 but where ‘air’ *trigger events occur
Sense directions 6-way: ±X, ±Y, ± Z
 
6-way: ±X, ±Y, ± Z
 
Unidirectional repeatability (2σ μm) Trigger level 1
Trigger level 2
0.4 μm
0.5 μm
(0.000016 in)
(0.000020 in)
0.4 μm
0.5 μm
(0.000016 in)
(0.000020 in)
XY (2D) form measurement deviation Trigger level 1
Trigger level 2
±0.8 μm
±0.9 μm
(0.000032 in)
(0.000036 in)
±1.0 μm
±1.2 μm
(0.000040 in)
(0.000047 in)
XYZ (3D) form measurement deviation Trigger level 1
Trigger level 2
±1.0 μm
±1.4 μm
(0.000040 in)
(0.000056 in)
±2.5 μm
±4.0 μm
(0.000100 in)
(0.000160 in)
Repeatability of stylus change With SCR 200
Manual
±0.5 μm
±1.0 μm
(0.000020 in) max
(0.000040 in) max
±0.5 μm
±1.0 μm
(0.000020 in) max
(0.000040 in) max
Trigger force XY plane
Z axis
All modules
All modules
0.02 N
0.07 N
0.02 N
0.07 N
Overtravel force (@ 0.5 mm displacement XY plane
 
Z axis
SF/EO module
LF module
SF/EO module
LF module
0.2 N – 0.4 N
0.1 N – 0.15 N
4.9 N
1.6 N
0.2 N – 0.4 N
0.1 N – 0.15 N
4.9 N
1.6 N
Weight (probe sensor + module) 22g (0.8oz) 22g (0.8oz)
Max. extension (if on PH1O series head) 300g (11.8oz) 300g (11.8oz)
Max. recommended stylus length (M2 stylus range) SF/EO module
LF module
50 mm (1.97 in) steel – 100mm (3.94 in GF)
20 mm (0.79 in) steel – 50mm (1.97 in GF)
 
50 mm (1.97 in) steel – 100mm (3.94 in GF)
20 mm (0.79 in) steel – 50mm (1.97 in GF)
 
Probe mounting method MB thread MB thread
Suitable interface PI 200 PI 200
Stylus module changing rack (automatic) SCR 200 SCR 200
Stylus module storage rack (manual) MSR1 MSR1

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Recent Updates