- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
TEDEA - Single Point Load Cells (1022)
| Previous | 36 / 76 | Next |
TEDEA - Single Point Load Cells (1022)
Brand: Tedea
Model: 1022
Descriptions:
Model 1022 is a low profile single point load cell designed for direct mounting of low cost weighing platforms.
Its small physical size, combined with high accuracy and aluminum construction, makes this load cell ideally suited for retail, bench and counting scales where savings in parts and labor due to simpler
scale construction can be made.
Available in a range of capacities, from 3 to 35kg and approved to OIML, R60 (4000d) or NTEP 5000d, single). Environ- mental protection to IP66 is provided as standard.
Features:
· Capacities: 3 - 35 kg (6.61 - 77.16 lbs)
· Only 22mm (.09 inch) high
· Aluminum Construction
· Single point 350mm x 350mm (13.78 inch x 13.78 inch) platform
· IP66 protection
· OIML R60 (Cert. TC 2792) and NTEP (Cert. 96-122) approved
· Class I, II, III Division 1 - FM (Factory Mutual)
· EEx ia IIC T4 - PTB
Specifications:
Wire Cable WITH CONNECTOR Head
* Total Error - According to OIML R60 ** 85% utilization standard *** 50% min utilization. Consult factory for other utilization factors.
C4 Grade also available.
Brand: Tedea
Model: 1022
Descriptions:
Model 1022 is a low profile single point load cell designed for direct mounting of low cost weighing platforms.
Its small physical size, combined with high accuracy and aluminum construction, makes this load cell ideally suited for retail, bench and counting scales where savings in parts and labor due to simpler
scale construction can be made.
Available in a range of capacities, from 3 to 35kg and approved to OIML, R60 (4000d) or NTEP 5000d, single). Environ- mental protection to IP66 is provided as standard.
Features:
· Capacities: 3 - 35 kg (6.61 - 77.16 lbs)
· Only 22mm (.09 inch) high
· Aluminum Construction
· Single point 350mm x 350mm (13.78 inch x 13.78 inch) platform
· IP66 protection
· OIML R60 (Cert. TC 2792) and NTEP (Cert. 96-122) approved
· Class I, II, III Division 1 - FM (Factory Mutual)
· EEx ia IIC T4 - PTB
Specifications:
Wire Cable WITH CONNECTOR Head
| GRADE | E | F | G** | C3*** | UNITS |
| Rated Capacities | 3, 5, 7, 10, 15, 20, 30, 35 | kg | |||
| Rated Output | 2.0 ± 10% | mV/V | |||
| Total Error* | 0.0300 | 0.0200 | 0.0200 | 0.0200 | ±% of Applied Load |
| Zero Return after 30 mins | 0.0500 | 0.0250 | 0.0170 | 0.0170 | ±% of Applied Load |
| Temperature Effect : On Output | 0.0030 | 0.0014 | 0.0010 | 0.0010 | ±% of Applied Load / °C |
| Temperature Effect : On Zero | 0.0100 | 0.0060 | 0.0040 | 0.0023 | ±% of Rated Output / °C |
| Eccentric Loading | 0.0085 | 0.0085 | 0.0057 | 0.0057 | ±% of Applied Load / cm |
| Zero Balance | 10.0 | ±% of Rated Output | |||
| Temperature range : Operating | -30 to +70 | °C | |||
| Temperature range : Compensated | -10 to +40 | °C | |||
| Safe Overload | 150 | % of Rated Capacity | |||
| Ultimate Overload | 300 | % of Rated Capacity | |||
| Excitation: Recommended | 10 | Volts AC or DC | |||
| Excitation: Maximum | 15 | Volts AC or DC | |||
| Input Impedance | 415 ± 15 | Ohms | |||
| Output Impedance | 350 ± 3 | Ohms | |||
| Insulation Impedance | >2000 | Mega Ohms | |||
| Deflection at Rated Capacity | <0.4 | mm | |||
| Weight | 0.15 | kg | |||
| Construction | Aluminum | ||||
| Environmental Protection | IP66 | ||||
| Cable |
0.5 Meter (Standard), 4 Wire, PVC, Single Floating Screen |
||||
| Approvals |
OIML R60 (Certificate TC 2792) and NTEP (Certificate 96 - 122) |
||||
* Total Error - According to OIML R60 ** 85% utilization standard *** 50% min utilization. Consult factory for other utilization factors.
C4 Grade also available.