- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
KANETEC – Magnetic Block KYA
| Previous | 30 / 30 | Next |
KANETEC – Magnetic Block KYA
Brand: Kanetec
Model: KYA
Application:
※ The above value attractive force is in case of round steel of dia.20 mm on V face.
※ For accuracy, please refer to attachment file.
※ Please take note that attractive force of the each face is reduced when a work piece is attracted on more than 2 faces at the same time.
Brand: Kanetec
Model: KYA
Application:
- Holding tools for marking and lightduty machining.
- Holding tools for electric discharge machining.
-
Holding tools for three-dimensional measuring instruments and various measuring systems.
- Workpieces can be held on three faces of top (V face) and both side faces.
- T-handle ON/OFF switch comes attached, but can be removed.
- They are of dripproof and oilproof construction.
- An M8 tapped hole is provided on the top for lifting (KYA-18B only).
- Super high accuracy finish is also available. Please contact us.
| [mm(in)] | ||||||||||
| Model | Holding Power | Applicable Diameter | Dimensions | Mass | ||||||
| V groove 1 | V groove 2 | V groove 1 | V groove 2 | B | H | L | Le | a | ||
| KYA-8B | 120N(12kgf) | 100N(10kgf) | Φ 10~ Φ 25 | Φ 8~ Φ 15 | 80(3.14) | 80(3.14) | 80(3.14) | 31(1.22) | 20(0.78) | 3.5 kg/ 7.7 Ib |
| KYA-10B | 200N(20kgf) | 120N(12kgf) | Φ 10~ Φ 35 | Φ 10~ Φ 30 | 100(3.93) | 100(3.93) | 100(3.93) | 42(1.65) | 26(1.02) | 7 kg/ 15 Ib |
| KYA-13B | 300N(30kgf) | 250N(25kgf) | Φ 10~ Φ 40 | Φ 10~ Φ 26 | 125(4.92) | 125(4.92) | 125(4.92) | 48(1.88) | 30(1.18) | 14 kg/ 30 Ib |
| KYA-15B | 400N(40kgf) | 400N(40kgf) | Φ 10~ Φ 38 | 150(5.90) | 150(5.90) | 150(5.90) | 61(2.40) | 32(1.25) | 23 kg/13 Ib | |
| KYA-18B | 300N(30kgf) | Φ 14~ Φ φ 50 | Φ 14~ Φ 50 | 180(7.08) | 180(7.08) | 180(7.08) | 69(2.71) | 38(1.49) | 37 kg/13 Ib | |
| KYA-20B | 650N(65kgf) | 650N(65kgf) | 200(7.87) | 200(7.87) | 200(7.87) | 101(3.97) | 51 kg/112 Ib | |||
※ For accuracy, please refer to attachment file.
※ Please take note that attractive force of the each face is reduced when a work piece is attracted on more than 2 faces at the same time.