- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
UNIPULSE - Torque monitor for UTM¢ò/UTMV
| Previous | 75 / 113 | Next |
UNIPULSE - Torque monitor for UTM¢ò/UTMV
Brand: Unipulse
Model: TM700
Product outline:
UTMII/UTMV series can be easily connected to TM700 with the supplied cable. With the high-speed sampling rate of 20kS/s, TM700 can support the high response time of UTMII/UTMV (1kHz). Fluctuation of torque, rotation speed, and power over a short period of time can be displayed.
Features:
Specifications:
Brand: Unipulse
Model: TM700
Product outline:
UTMII/UTMV series can be easily connected to TM700 with the supplied cable. With the high-speed sampling rate of 20kS/s, TM700 can support the high response time of UTMII/UTMV (1kHz). Fluctuation of torque, rotation speed, and power over a short period of time can be displayed.
Features:
- Torque monitor for UTM¢ò/UTMV.
- Display the curves of torque, rotation speed, and power.
- Enable the cogging torque measurement with UTMII/UTMV.
- Easy connection to UTM¢ò/UTMV with one cable.
- Operation power can be supplied to the UTM¢ò/UTMV (and to the optional rotary encoder as well).
- Upper/lower limits & hold function.
- Ideal for applications such as nut runners, motor test benches, engine test bench, mixer, wind power generation, etc….
Specifications:
| Torque input (voltage input) | |
| Signal input range | -5 to +5V Input impedance£º1MΩ or more |
| Accuracy |
Non-linearity£ºwithin 0.02%FS±1digit Zero drift£º within 0.2mV/¡æ RTI Gain drift £º within 0.01%/¡æ |
| Analog filter |
Low pass filter (-6dB/oct.) Select from 10, 30, 100, 300, 1k, 3k, 10k, 30kHz |
| A/D converter |
|
| Monitor output | Output level £ºinput voltage cuff (for test point) |
| Input for high-speed rotation (open-collector pulse) : for standard UTMII/UTMV. | |
| Maximum input frequency | In accordance with the output frequency of the UTM¢ò/UTMV series |
| Minimum input frequency |
Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr) 60, 40, 20, 12, 8 rpm (when pulse rate is 1 ppr) |
| Minimum detection pulse width | 50μs |
| Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (Ic£½Approx. 10mA) |
| Input for low-speed rotation (open-collector pulse): for UTMII with rotary encoder option | |
| Maximum input frequency | Approx. 1000rpm |
| Minimum input frequency | 0.1rpm |
| Minimum detection pulse width | 5μs |
| Circuit configuration |
No-voltage contact input (minus common) Open collector connectable (Ic£½Approx. 10mA) |
| Display section | |
| Display unit | 3.5 inch TFT color LCD |
| External I/O signal | |
| External output (8) | ex) high and low limit outputs |
| External input (10) | ex) hold control input, digital zero input(DZ) |
| Interface | |
| Standard |
SIF£º2-wire serial interface USB£ºUSB interface |
| Option | D3V£ºD/A converter voltage output (3ch) |
| General specifications | |
| Power supply | DC24V (±15%) |
| Power consumption | 18W max |
| Operating conditions |
Operation temperature£º-10 to +40¡æ, storage temperature: -40 to +80¡æ humidity£º85%RH or below (non-condensing) |
| Dimension | 96(W)× 96(H)× 138(D)mm (excluding projections) |
| Weight | Approx. 1.0kg |
| CE marking certification | EMC directives EN61326-1 |