- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
3GB Series - S/S304 3 Port Glove Box
| Previous | 5 / 87 | Next |
3GB Series - S/S304 3 Port Glove Box
Brand: Rankconn Instruments
Model: 3GB
Product introduction:
This 3 Port Glove Box are design to fit customer desired specification for their lab testing purpose.
Features & Configuration :
Part 1: Body structure:
Part 2: Antechamber
Part 3: Nitrogen / Oxygen Analyzer Controller
Part 4: Temperature & Humidity - Thermohygrometer
Part 5: Automatic Pressure Controller
Part 6: Vacuum Pump
C. Working Process/Principle Inside the glove box:
- Mixing sample by heating using the hotplate.
- Fumes will created, so it’s need to extracted out the fumes, meanwhile N2 inside the glovebox will lessees.
- (The soft pipe at the top inside the glove box can used to extracted the fumes.)
- (The Automatic Pressure Controller can control the pressure inside the glove box)
- So must purse in the N2 again to meet the desired spec.
Brand: Rankconn Instruments
Model: 3GB
Product introduction:
This 3 Port Glove Box are design to fit customer desired specification for their lab testing purpose.
Features & Configuration :
Part 1: Body structure:
- 1 x Chambers made of SUS304 stainless steel, acid resistant, 3mm thickness; dimension: 1500W x760D x 900H mm (3 gloves)
- 1 x Toughed glass windows
- 3 x Glove ports Diameter 218©\220mm
- 3 x Gloves made of Butyl
- 1 x PowerBoard,110V~250V
- 1 x Lighting systems
- 1 x UV light Mercuric germicide with 254nm
- 4 x KF40 spare connectors
Part 2: Antechamber
- 1 x Large antechamber made of stainless steel, diameter 381mm x length 800mm, right side.
Part 3: Nitrogen / Oxygen Analyzer Controller
- Range 100ppm-21%, can control the Oxygen level inside the glove box by communicate with the Nitrogen purse system.
Part 4: Temperature & Humidity - Thermohygrometer
- Display of Temperature & Humidity
- Range Temp: 0-99°C ; Humidity: 1©\99% RH
Part 5: Automatic Pressure Controller
- Range ©\2500PA ~2500PA ,
- Can control the pressure inside the main chamber automatically
Part 6: Vacuum Pump
- Single Stage Vacuum Pumps for vacuum glove box.
- Flow rate: 8CFM / 212L/min
- Ultimate Vacuum: 10Pa/75Microns
- Power: ½ HP
C. Working Process/Principle Inside the glove box:
- Mixing sample by heating using the hotplate.
- Fumes will created, so it’s need to extracted out the fumes, meanwhile N2 inside the glovebox will lessees.
- (The soft pipe at the top inside the glove box can used to extracted the fumes.)
- (The Automatic Pressure Controller can control the pressure inside the glove box)
- So must purse in the N2 again to meet the desired spec.