- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Paper & Film Packaging Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
MULTICOMP - Surface Resistance/ Resistivity Meter
| Previous | 21 / 86 | Next |
MULTICOMP - Surface Resistance/ Resistivity Meter
Brand: Multi Comp Pro
Part No: MP005768
Product Descriptions:
The Multicomp Pro MP005768 surface resistance meter has been designed to measure both surface resistance and resistance to ground. To measure surface material place the meter on the area to be tested and press the test button. For measuring resistance to ground, place the ground lead into the earth leakage socket, connect the crocodile clip to the area to be tested and press the button.
The meter will test conductive, static dissipative and insulative surfaces using two parallel bars set to give Ohms per square readings. Conductive is indicated by green LEDs from 103 - 105, static dissipative by yellow LEDs from 106 - 1011 and insulative by re LEDs 1012+.
Product Features:
Technical Specifications:
Brand: Multi Comp Pro
Part No: MP005768
Product Descriptions:
The Multicomp Pro MP005768 surface resistance meter has been designed to measure both surface resistance and resistance to ground. To measure surface material place the meter on the area to be tested and press the test button. For measuring resistance to ground, place the ground lead into the earth leakage socket, connect the crocodile clip to the area to be tested and press the button.
The meter will test conductive, static dissipative and insulative surfaces using two parallel bars set to give Ohms per square readings. Conductive is indicated by green LEDs from 103 - 105, static dissipative by yellow LEDs from 106 - 1011 and insulative by re LEDs 1012+.
Product Features:
- Tests conductive, static dissipative and insulative surfaces using two parallel bars
- Conductive is indicated by green LEDs
- Static dissipative by yellow LEDS from 106-1011
- Insulative by red LEDs from 1012+
- Operating temperature range from 5-19°C
- Requires 9V, PP3 battery (not supplied)
- Test Voltage of 9V
- Accuracy of -/+ 10%
- Repeatability of -/+ 5%
- 6oz device weight
Technical Specifications:
| Technical Specification | Technical Data | |
| Decade Changeover | +/- ½ Decade on a Logarithmic Scale (3.16 x 10n) | |
| Resolution | 1 Decade | |
| Accuracy | +/- ½ Decade | |
| Temperature | Operating | 5°C to 49°C |
| Storage | -15°C to +60°C | |
| Power | 9V PP3 Alkaline Battery | |
| Test Voltage | Nominal 9V | |
| Accuracy | +/- 10% | |
| Repeatability | +/- 5% | |
| Weight | 6 Ounces | |